McGill 20 Sheet Heavy Duty One Hole Punch

One of the most versatile and all purpose hole punches is the heavy duty puncher by McGill.   This tool can punch up to 20 sheets of regular bond paper, but can also be used on leather, foil, cloth, plastic and leather.  It punches a ¼ inch hole and has a built-in receptacle to catch to punches.

One thing to remember is that while this unit “can” cut through paper and other materials, it is better not to use the same hole punch on paper if you are planning to use it with something else.  Just as with scissors (you should never use your fabric scissors on paper,) paper dulls the edge and it won’t punch a clean hole after awhile.

Neiko Hand Held Power Punch

If you are planning on doing a lot of metal working, it might be a wise idea to buy a heavy duty single hole metal punch to use exclusively.  One of the most popular models is the Neiko hand held power punch.   The punch will work on a wide range of materials from thin brass metal to 16 gauge steel.

The Neiko Power Punch is a versatile tool in that it comes with seven punch and die sets than can easily be swapped out and interchanged as needed.  The tool will punch in the following sizes:  3/32, 1/8, 5/32, 3/16, 7/32, 1/4 and 9/32″.

This tool is a favorite with crafters as well as traditional metal workers, and while it is designed specifically for metal punching, some buyers have used it for other uses as well, such as leather and plastic.  Jewelry makers love it, both the ease of use and the effectiveness as well as the fact that it comes with multiple die sets, eliminating the need to buy multiple tools for each size of punch.

Hougen 75006 Ogura Punch-Pro Hole Puncher

If you need an industrial level heavy duty hole punch, consider the Hougen Hydraulic Hole Puncher.  This is the company’s top of the line model that will punch holes up to 15/16 inch round and through ½ inch thick material in under four seconds with 34.1 tons of pressure.

While competing punches of similar power have multiple components and require hydraulic hoses, making the entire unit difficult to use, the Hougen 75006 model has a single body chassis and is powered by a single 120 V cord making moving the unit much easier.

The unit is only 65 pounds and comes with a work stand, foot switch, two dies, a tool kit, and a 13/16-inch punch.

Swingline Medium Duty Electric Hole Punch

When your office needs required a large number of sheets of paper of be punched on a regular basis, the best choice may be to invest in a heavy duty electric hole punch.    One mid range option is the Swingline Medium Duty Electric Hole Punch.

This puncher operates with the touch of a single button and can punch up to 50 sheets of standard 20 lb paper at one pass.   On the chance that the machine does jam, it comes equipped with an electric reverse switch to clear the stuck paper pieces.

>> Find the best price on the <<
>> Swingline Electric Hole Punch <<

Swingline Heavy Duty Hole Punches

Swingline is a manufacturer that produces several different lines of office products, including hole punches.  They offer a wide selection of punches, including basic 3 hole punches, electric hole punches, and adjustable hole punches.

One of their best values is their heavy duty T-handle hole punch.    While it isn’t as convenient as their electric hole punch models, it very affordable, suitable for both home or office, and also has the versatility of creating either two, three, or four hole punches, which is a feature that is not found in many other models.    In addition if you purchase additional punch heads, this model can be expanded up to a heavy duty 7 hole punch!

This punch has the capability of punching up to 40 sheets of standard weight paper at a time and can be used on letter, legal and A4 size paper.   When reading the reviews on this product, many buyers purchased it to use on legal sized papers and reports as it is difficult to find hole punches that will work on this size.

Find the best price on the Swingline Hole Punches

If you are looking for a versatile and affordable heavy duty punch and aren’t ready to make the investment in a higher end electric model, the Swingline heavy duty hole punch may be your best choice.

Many are avid proponents of the Franklin Covey organizing and planning system.  While Coveites are technofiles and manage all of their projects and activities through their smart phone, many still prefer putting pen to paper and using a physical dayplanner. 

However, to get the full use out of a dayplanner and to customize it to your own specific needs, you will most likely need to add sheets beyond what is available in the standard planner refills.  Maybe you have a custom template for projects, follow-up, or lead information.  Maybe you have productivity reports or price lists that you like to keep on hand. 

Whatever the reason, in order to include those sheets and papers in your daytimer, they must be punched first.  Using a single hole punch can be a tedious and very time consuming process.  Who wants to punch all seven holes by hand?  Not to mention that if you use the one-at-a-time method, the holes will most likely be off and you’ll have rings pulling on mismatched holes and end up with an uneven mess.  It kind of defeats the purpose of an “organizer” doesn’t it.

To avoid this, a heavy duty 7 hole punch is needed.  This will allow you to quickly punch seven holes in your custom sheets and papers all at once. 

Some of the 7 hole punches, like the Daytimer brand punch, are designed specifically for their own products with smaller diameters holes than a standard hole punch.  Other 7 hole punches are actually adjustable and can be used for more purposes than punching papers for your dayplanner. 

When looking for an adjustable hole punch, take careful note of the actual product construction.  While there are a number of brands that advertise “ 2 to 7 adjustable hole punch,” sometimes this means that there are seven spaces that the hole punch can be adjusted to, not that there are seven punch heads.  Even with adjustable hole punches that do have seven punch heads, some are not truly adjustable to any position.  Be sure to read the manufacturer description very carefully to ensure that the product will meet your needs.

If you use a physical daytimer or planning system, a heavy duty 7 hole punch can come in very useful.  Before purchasing a hole punch, take note of the spacing of the holes for your planning system and carefully examine the product description to ensure the hole punch you buy will fit your needs.

Heavy Duty Single Hole Paper Punch

While standard handheld punchers are adequate for occasional use, they are not suitable for large volume punching.  In those cases, a heavy duty single hole punch can be used.  Models are available that will punch between 12 to 20 sheets at one pass.

Large Hole Punches

As scrapbooking, paper piecing, and crafting are becoming more popular, the large hole punch is becoming more in demand.  Large hole punches come in a variety of diameters, from the standard ¼” hole punch, to 2 inch hole punches . . . sometimes even larger.

Leather Hole Punch

Another common use for large hole punches is on leather.  A leather hole punch can come in two forms:  a handheld leather punch and a hollow punch set.   Most handheld leather punches come with a rotating head that allow you to punch holes in different sizes ranging from 2 mm to 4.5 mm.  If a larger hole is needed, or if you need more flexibility on where the hole is placed, a leather hollow core punch set may be more appropriate.

Metal Large Hole Punch

Metal hole punch tools range from handheld punches to commercial die cuts.  For most residential and small office purposes, a handheld metal hole punch will work quite well.  As with the leather punches, the metal hole punches come with a variety of punch diameters ranging from 3/32” to 9/32.”  If larger holes are needed,  a versatile hollow punch set can be used on a variety of materials including leather, metal and paper.

If your project needs a hole punched larger than the standard 1/4”, go with a large hole punch instead.  Depending on the material used, a variety of punches are available, both handheld and hollow core, that can punch through paper, metal and leather.

Benefits of a Heavy Duty Electric Hole Punch

One of the benefits of purchasing an electric hole punch rather than a a manual model is the speed of use.  With a push of a button, a stack of papers can be punched and ready for assembly and binding.  The other plus is that a greater uniformity can be achieved when punching the papers.  There is less chance for papers to slip as the operator only has to slide the papers in and push a button rather than hold the papers and operate the lever at the same time.

The one downside to an electric heavy duty hole punch rather than a manual model is that the electric heavy duty models have a lower maximum number of papers you can punch at one time versus their manual counterparts.  The upper limit for the heavy duty commercial models is 40 to 50 pages at a time with the average being around 20 pages.  In contrast, some models of a manual heavy duty 3 punch can punch up to 300 pages at one pass.

Adjustable Heavy Duty Electric Hole Punch

Versatility and flexibility does not need to be sacrificed when an electric hole punch is chosen.  Many electric hole punches have the option to adjust the location of the punches and can be used for both 2 hole and 3 hole configurations.

Combination Heavy Duty Hole Punch and Binder

For those who need spiral or comb bound reports, the investment in a combination hole punch and binder might be a wise investment.  Rather than purchasing two machines, one for punching and one for binding, a combination heavy duty hole punch and binder provides an all-in-one solution.  Electric combination  models are also available.

Whatever your hole punching and binding needs are for your office, you will be able to find a heavy duty electric hole punch to meet your needs.  In order to make the best choice from among the wide selection available, make a list of the features that you will need and determine the maximum size of reports you will typically bind.

Steel Hole Punches

Steel is the most popular material for hole punches for businesses.  Steel hole punches tend to hold up well to wear and tear.  Also a steel hole punch will keep the sharpness and the crispness of the holes punched for a longer period of time than other types of materials.  When purchasing a hole punch for a business, longevity is an important factor to consider when determining the return on your investment.

Swingline Heavy Duty 3 Hole Punch

Swingline is a popular manufacturer of heavy duty hole punches.  Known for its line of office products, particularly for its staplers, you would be hard pressed to find an office that did not have at least one Swingline product. 

Holding true to their reputation for quality, Swingline manufactures heavy duty hole punchers in a variety of formats including: 3 hole punches, 2 hole punches, adjustable hole punches, electric hole punches, large hole punches, 1 hole punches, 7 hole punches . . . basically anything that needs to be punched, Swingline has a heavy duty hole punch to meet the bill.  Swingline manufactures both a level and electric model of a 3 hole punch.

Carl Heavy Duty 3 Hole Punch

CARL is an office product manufacturer that is known for their high capacity heavy duty hole punches. The capacity of the models range from 50 to up to 300 sheets at one pass.  The paper punchers are made with steel and uses a hollow punch head technology which requires less force on the part of the user.  The blue and grey styling of the punches fit in with the décor of most offices.

Another reason CARL heavy duty hole punches are a favorite with businesses is that the punches can be replaced when they wear out.  While the majority of other more inexpensive models have to be thrown away when the punches wear out, the CARL hole punches can be given new life by replacing the punches.

A heavy duty 3 hole punch is a standard piece of equipment in most office settings.  By choosing your purchase carefully, the hole punching tasks can be performed quickly and efficiently.

Heavy duty hole punches come in a variety of formats, as well as method of power.  Most of the standard types are fueled by good old fashioned elbow grease.  Long handled models make this easier.   It is basic physics, a longer lever requires less physical effort.

They also come in a variety of materials.  If you know you will be using the hole punch for larger jobs on a regular basis, be sure to choose a model that will hole up to the wear and tear.  Scrimping on quality can end up costing you more in the long run.  Not only will the hole punch wear out faster, but if the puncher does not punch cleanly, you will be spending more in wasted paper and extra copies.

If you would like the smoothest and fastest method of hole punching, you may want to consider an electric heavy duty hole punch.  Electric hole punches range in grade from inexpensive models suitable for home use that are designed to punch through a handful of sheets at a time to commercial grade models that can hole punch 50 to 100 sheets cleanly at one pass.  Imagine how quickly preparing for presentations would be and how uniformly the holes will be punched.

Heavy Duty Hole Punches

Another feature to consider when purchasing heavy duty hole punches is whether or not the model is adjustable.    The more powerful the hole punch, the less likely the model will be adjustable.  If the higher powered models are adjustable, they take extra care to make sure that the punches are secured tightly so that there is no slippage.   While there are not as many adjustable hole punches in the selection of electric hole punches, there are still some available.

While hole punching can be a tedious task at times, a heavy duty hole punch can greatly alleviate the burden and speed up the time needed for the task.   Whatever your office or business needs, whether for large presentations or periodic small reports, there are a wide variety of punches that will fit the bill.

Heavy Duty Single Hole Punch

While the most common type of hole punch is a three hole or single hole punch designed for paper, another frequently used type of punch is a heavy duty single hole punch.   A one hole punch may be needed for punching multiple sheets of paper or cardstock, leather, or metal.